Crown 6" - 12

This fancy 6" - 12 crown mould measures 6.000" wide by .812" thickness. The attractive profile is comprised of a 13/32" tall vertical line on top, connected to an 11/32" radius ovolo that transitions into a 2-7/64" cavetto in the center, joined to another 11/32" ovolo with a 9/16" cove and a 1/2" broad line at the bottom of the design. We have a small family of this beautiful style in different widths for your review and consideration, crown 5.187" - 9, crown 5.625" - 9 and crown 4.250" - 40.

The spring angles are fixed at forty-five degrees, these specific back bevels set the installed height at 4-13/64" tall with a projection of 4-9/32" wide. Read our commentary about axial constant positioning for crown bevels; the article will help you dial this profile in axially on the first try when milling this detail provided the machine is axially calibrated. Three high points in the detail were purposely positioned on the same plane; our disciplined design features will assure excellent hold-down conditions while milling, providing the machine's pressure shoe is parallel to the machine bed plates.