Crown 6-5/16" - 2

This standard 6-5/16" - 2 terminating crown mould measures 6.313" wide by 1.000" thickness. The typical profile comprises a 5/8" tall vertical line on top, connected to a 2" radius semicircle tangent off of a 1-15/32" radius arc creating the cyma reversa, joined to a 3/8" tall vertical line with a 1-9/64" cove and a 5/8" broad segment at the bottom of the design.

The spring angles are fixed at thirty-eight and fifty-two degrees, these specific back bevels set the installed height at 4-7/8" tall with a projection of 4" wide. Read our commentary about axial constant positioning for crown bevels. The article will help you dial this profile in axially on the first try when milling this detail provided the machine is axially calibrated. Two high points in the detail were deliberately positioned on the same plane. Our specialized design features will assure excellent hold-down conditions while milling, providing the moulder pressure shoe is parallel to the machine bed plates. You may want to use a felt-lined hold-down shoe while milling this detail to eliminate any unsightly burnish mark on the cyma recta from the metal pressure shoe on the molder.