Crown 6" - 35

This timeless classic 6" - 35 colonial crown mould measures 6.000" wide by .812" thickness, enabling the detail to be milled from four-quarter lumber. The ageless profile is composed of a 7/16" tall vertical line at the top, connected to a three tangent radius cyma recta in the center, joined to a 3/16" tall vertical line segment with a 9/16" cove and a 5/8" wide horizontal line on the bottom of the pattern. The spring angles are fixed at forty-five degrees, these specific back bevels set the installed height at 4-3/32" tall with a projection of 4-13/32" wide.

Read our commentary about axial constant positioning for crown bevels, the article will help you dial this profile in axially provided the machine is properly calibrated. Two high points in the detail were deliberately positioned on the same plane; our disciplined design features will assure excellent hold-down conditions while milling, as long as the machine's pressure shoe is parallel to the machine bed plates. We recommend using a felt line pressure shoe on the molder to eliminate any unsightly burnish mark that may be caused by the metal hold-down shoe on the center bead of the design.