Crown 6" - 18

This innovative 6" - 18 crown mould measures 6.000" wide by .812" thickness. The decorative terminating profile is comprised of a 3/4" tall vertical line with a 7/32" radius edge at the top, connected to a four tangent radius cyma recta in the center, joined to an 11/32" tall vertical line that transitions into a 31/64" radius ovolo with a 25/64" cove and a 23/64" horizontal line at the bottom of the design. From just an idea in one's mind to reality in their home, our profiles reflect the beauty and style of your imagination.

The spring angles are fixed at thirty-eight and fifty-two degrees, these specific back bevels set the installed height at 4-13/16" tall with a projection of 3-19/32" wide. Read our commentary about axial constant positioning for crown bevels. The article will help you dial this profile in axially on the first try when milling this detail, provided the machine is axially calibrated. Four high points in the detail were deliberately positioned on the same plane. Our specialized design features will assure excellent hold-down conditions while milling, providing the machine's pressure shoe is parallel to the machine bed plates. You may consider using a felt-lined pressure shoe to eliminate unsightly burnish marks left on the radius arcs from the metal hold-down unit on the machine.