Crown 4-5/32" - 8

This 4-5/32" - 8 ornate crown mould measures 4.155" wide by .750" thickness, permitting the use of a 4-7/16" wide blank of four-quarter lumber for milling sprung (laying horizontally flat) on an industrial molder. The sophisticated terminating profile contains an 11/64" cove flanked by vertical and horizontal line segments on the top left. The concave semicircle connects to a 5/16" ovolo bordered by short lines with a one-inch cove in the center. The remaining portion consists of three 3/8" convex arcs merged with protruding perpendicular lines and an elliptical-shaped convex arc on the bottom right side of the design. The set spring angles are at forty-five degrees; these dedicated back bevels keep the face side of the profile parallel to the wall and ceiling when installed. These specific angles also lock in the positioned height at 2-15/16" tall with a 2-15/16" projection across the top. We offer a small family of this profile in different size widths for your review and consideration, crown 3.437" - 14, crown 4.375" - 20, and crown 6.500" - 4.