Crown 2-1/2" - 26

This decorative 2-1/2" - 26 crown mould measures 2.500" wide by .750" thickness, enabling the pattern to be milled from four-quarter lumber. The customized profile has colonial overtones built into the design, it is composed of a 7/32" tall vertical line on top that connects to a 1/2" concave semicircle tangent off of a 7/16" radius arc creating the cyma recta in the center, attached to a 7/32" tall by 9/64" broad squared lines that transition into an ovolo with 9/32" tall by 17/64" broad squared lines at the bottom of the pattern. The spring angles are fixed at thirty-eight and fifty-two degrees, these specific back bevels set the installed height at 1-15/16" tall with a projection of 1-19/32" wide.

Read our commentary about axial constant positioning for crown bevels, the article will help you dial this profile in axially on the first try when milling this detail provided the machine is axially calibrated. Three high points in the detail were deliberately positioned on the same plane; our specialized design features will assure excellent hold-down conditions while milling, providing the moulder pressure shoe is parallel to the machine bed plates.