Crown 2-1/2"

This 2-1/2" concave crown mould measures 2.500" wide by .750" thickness. The lovely supporting profile is comprised of a 1-11/64" radius cavetto in the center flanked by a 1/8" tall and wide line with a 1/16" radius point, joined to a quarter round bead on both the top and bottom of the pattern. The spring angles are fixed at forty-five degrees, these specific back bevels set the installed height and projection at an identical dimension of 1-49/64" tall and wide.

Read our commentary about axial constant positioning for crown bevels, the article will help you dial this profile in axially on the first try when milling this detail provided the machine is axially calibrated. Two high points in the detail were deliberately positioned on the same plane; our specialized design features will assure excellent hold-down conditions while milling, providing the pressure shoe is parallel to the machine bed plates. You may want to consider wrapping the pressure shoe in felt to eliminate any unsightly burnish mark that may be indented on the beads from the molder's metal hold-down shoe.