Cove Moulding 7-7/8"

This extensive cove/crown moulding 7-7/8" measures 7.875" in width by 1.000" in thickness and requires 8-1/8" wide blanks of five-quarter lumber for machining on an industrial moulder. The stylish symmetrical profile comprises a 10-13/32" concave semicircular arc in the center. Flanked by a 49/64" tall vertical fillet in the upper left and a 49/64" horizontal line segment on the lower right side of the design. The spring angles are at forty-five degrees; the dedicated back bevels keep the face sides of the pattern parallel to the wall and ceiling. These specific angle positions lock in the installed height at 5-9/16" tall with a 5-9/16" projection across the top.

Review our commentary about axial constant positioning for crown bevels, the article will help you dial this profile in axially, provided the machine is properly calibrated. Two high points in the pattern layout are positioned on the same plane. Our disciplined design features will assure excellent hold down conditions while milling as long as the pressure shoe is parallel to the machine bed-plates.

For knife quoting purposes, click the calculator below; we supplied the important measurements; please insert the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. If you would like some assistance with the dimensions, feel free to print a copy of our fraction - decimal - millimeter chart, place it on the machinery around the shop to help operators save time and increase accuracy during setup procedures.

Width = 7.875" / Depth of Cut = .621" (top knives).

Thickness = 1.000" / Depth of Cut = .472" (right blades) & .472" (left cutters).