Cove Mould 3" - 5

This simplistic cove mould 3" - 5 measures 3.026" in width by .718" in thickness, requiring 3-5/16" wide blanks of four-quarter lumber for machining with a commercial moulder. The basic terminating profile comprises a 7/32" vertical line segment on the top left. It connects to a 2-21/32" cavetto in the center with a 3/16" horizontal fillet on the bottom right side the design. The fixed spring angles are at thirty-eight and fifty-two degrees; these particular back bevels keep the face side of the profile parallel to the wall and ceiling when installed, in addition to locking in the height at 2-3/8" tall with a 1-7/8" projection across the top.

Review our commentary about axial constant positioning for crown bevels, the article will help you dial this profile in axially, provided the machine is properly calibrated. Three high points in the pattern layout are positioned on the same plane. Our disciplined design features will assure excellent hold down conditions while milling as long as the pressure shoe is parallel to the machine bed-plates.

For knife quoting purposes, click the calculator below; we supplied the important measurements; please insert the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. If you would like some assistance with the dimensions, feel free to print a copy of our fraction - decimal - millimeter chart, place it on the machinery around the shop to help operators save time and increase accuracy during setup procedures.

Width = 3.000" / Depth of Cut = .373" (top knives).

Thickness = .719" / Depth of Cut = .467" (right blades) & .746" (left cutters).