Cove Mould 3" - 4

This cove style crown mould 3" - 4 measures 3.000" wide by .750" thickness, allowing the detail to be milled from four-quarter lumber. The profile is comprised of a 1-29/32" cove flanked by an 11/32" tall vertical line on top and a 3/8" wide horizontal line on the bottom. The spring angles are fixed at thirty and sixty degrees, these specific back bevels set the installed height at 2-47/32" tall with a projection of 1-5/8" wide. Two high points in the detail were deliberately positioned on the same plane; our specialized design features will assure excellent hold-down conditions while milling this detail, providing the pressure shoe is parallel to the machine's bed plates.

Want to learn how to become more efficient while searching over 15,000 moldings in our state-of-the-art profile catalog? Watch the short video on the first page to find design ideas for your next project; we are sure you will locate the correct patterns to enhance the architectural era of your beautiful home or office.

For knife quoting purposes, click to open the calculator below; we have added only the important measurements; please enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. Need some assistance with the dimensions? Print a copy of our fraction - decimal - millimeter chart, place it on the molder to help operators save time and increase accuracy during machine setup.

Width = 3.000" / Depth of Cut = .438" (top knives.)

Thickness = .750" / Depth of Cut = .341" (right blades) & .744" (left cutters).