30 Degree Back Bevel Cutter

This 30-degree back bevel cutter is designed for milling a chamfer on the backside of a piece of bed, crown, or cove moulding. On this thirty-degree (off the inside fixed fence on the molder) design, the maximum depth of cut is .625" with the maximum height of cut being set at 1.082". All sprung moulding designs have height numbers near the edge of the degree on the paperwork we provide; that number must be smaller than the height number in the image above, in this case, 1.082" for this knife to be able to cut while milling, if not, select another size bevel that is suitable for your application, we have a few to choose from.

Our yellowish green colored ceramic blend Weinig grinding wheel hogging at 2000 rpm, with a twenty-five-degree back clearance angle will rough grind a set of high-speed steel cutters in a minimal amount of time. Review our article on the importance of having the profile grinder level . This commentary will ensure prolonged use of your machinery while maintaining consistent perfection when grinding cutters.