Cove 1-1/4" - 2

This 1-1/4" - 2 cove mould measures 1.250" wide by .500" thickness. The detail is milled sprung (laying horizontally flat) from four-quarter lumber. The symmetrical profile is composed of a 3/4" radius cove in the center that is flanked by a 3/16" tall vertical line on top and a 3/16" broad line at the bottom of the design. The spring angles are fixed at forty-five degrees, these specific back bevels set the installed height at 7/8" tall with a projection of 7/8" wide.

Read our commentary about axial constant positioning for crown bevels, the article will help you dial this profile in axially on the first try when milling this detail provided the machine is axially calibrated. Two high points in the detail were deliberately positioned on the same plane; our specialized design features will assure excellent hold-down conditions while milling, providing the machine's pressure shoe is parallel to the machine bed plates.