Bed Mould 2-1/4" - 1

This custom 2-1/4" - 1 bed mould measure 2.250" wide by .750" thickness. The classic supporting profile comprises an 11/16" radius arc on top left. It's connected to a 5/16" tall vertical line in the center, joined to a 17/32" radius cavetto with a 5/16" wide horizontal line at the bottom of the pattern. These designs were intended to be utilized as transitional pieces in a cornice buildup; they are typically installed below the corona and above the frieze board.

The spring angles are fixed at thirty-eight and fifty-two degrees, these specific back bevels set the installed height at 1-27/32" tall with a projection of 1-3/8" wide. Read our commentary about axial constant positioning for crown bevels, the article will help you dial this profile in axially on the first try when milling this detail provided the machine is axially calibrated. Two high points in the detail were deliberately positioned on the same plane; our specialized design features will assure excellent hold-down conditions while milling, providing the machines pressure shoe is parallel to the machine bed plates.