1/8" Radius Edge - 35

This double-radius edge molding 1/8" - 35 measures 3.000" wide by random thickness, requiring the use of a 3-1/4" wide blank of various thickness lumber for milling on an industrial molder. The knives are capable of milling two 1/8" round-overs on a piece of lumber measuring 3" thickness or width. The acrylic template can be moved over and referenced to either side of the profile knife grinder to manufacture a set of knives for the cutter heads on the molder. This action will enable all four sides of the lumber to get milled simultaneously. Suppose you want to cut the edges of the lumber from the right and left vertical cutter heads to mill random widths; we have other patterns to accomplish this.

Our purple colored ceramic blend grinding wheel hogging at 2000 rpm with a twenty-five-degree back clearance angle will rough grind a set of high-speed steel cutters in a minimal amount of time. Review our article on the importance of having the profile grinder level. This commentary will ensure prolonged use of your machinery while maintaining consistent perfection when manufacturing the cutters.