Panel Moulding 2-9/16" - 3

This creative panel moulding 2-9/16" - 3 measures 2.641" wide by 3/4" thickness, enabling the pattern to be milled sprung (laying horizontally flat) out of four quarter lumber, after machining and installed the detail dimension will be 2-9/16" wide by 1-5/16" tall. The gracefully stylish profile is composed of a 13/64" cove and a 3/32" wide fillet on the top left, attached to a free-flowing three tangent radius cyma reversa with a 3/32" vertical drop in elevation in the center, connected to a beautiful two tangent radius ogee and a 1/4" wide by 1/8" deep perpendicular notch leaving a 1/8" thickness dimension on the right side of the design, the opposite side of the detail has a 1/4" wide by 3/4" tall beveled rabbet for the transition between the two entities.

This template ready cad generated dxf file (available for purchase in the link below) contains three skillfully drafted template designs for producing moulding knives for this lovely panel mould. All our innovative profiles have a proven unbroken computer numerical control (CNC) tool path which will expedite the production process. We offer a similar alternative pattern that can be machined with two sets of cutters for your review and consideration, panel moulding 2.562", this pattern requires six quarter lumber for milling, and the panel rabbet heights are altered.

For moulding knife quoting purposes click to open the calculator below, we supplied only the important measurements, just enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. If you would like some assistance with the dimensions feel free to print a copy of our fraction - decimal - millimeter chart, place it on the molder, or around the shop to help machine operators save time and increase accuracy during setup procedures.

Width = 2.625" / Depth of Cut = .688" (top knives) & .171" (bottom cutters.)

Thickness = .750" / Depth of Cut = 1.218" (left cutters.)