Panel Moulding 2-9/16"

This gorgeous panel moulding 2-9/16" measures 2.562" wide by 1.187" thickness, necessitating the use of six quarter lumber for milling on an industrial style molder. The beautiful profile is composed of a 1/4" cove on the left, connected to a 9/64" wide line segment that merges with a graceful two tangent radius cyma reversa in the center, attached to a 5/64" vertical line that joins to a small two tangent radius ogee with a 1/4" notch leaving a 1/8" thickness dimension on the right side of the pattern, the backside rabbet measures 1/4" wide by 11/16" tall.

Weinig's light blue colored full ceramic grinding wheel hogging at 2000 rpm, with a twenty-five-degree back clearance angle will rough grind a set of high-speed steel cutters in a minimal amount of time. Also review our article on the importance of having the profile grinder level, this commentary will insure prolonged use of your machinery while maintaining consistent perfection when manufacturing cutters.

For knife quoting purposes click to open the calculator below, we have added only the important measurements, just enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. Need some assistance with the dimensions? Print a copy of our fraction - decimal - millimeter chart, place it on the molder to help operators save time and increase accuracy during machine setup.

Width = 2.562" / Depth of Cut = 1.062" (top knives.)

Thickness = 1.187" / Depth of Cut = .250" (left cutters.)