Panel Mould 1-3/8" - 15

This decorative panel mould 1-3/8" - 15 measures 1.375" wide by 1.062" thickness, allowing the detail to be machined out of five-quarter lumber. The designer profile is composed of a 1/8" wide horizontal line segment in the upper left-hand side, attached to a 3/16" radius arc tangent to a down-sloping sixty-seven degree angled line tangent to a 9/64" concave semicircle in the center, attached to an 11/64" wide bead that merges with a 3/32" wide flat line with a 9/64" cove on the right side of the design, the rabbet dimension on the left side measures 1/4" wide by 3/4" tall. We offer a couple of similar patterns in the same width. Still, different rabbet heights for your review and consideration, panel molding 1.375" and panel moulding 1.375" - 27.

We're delighted you found a functional profile that interest you, please consider all the other services we offer for your precision woodworking company. Mirror Reflections offers hundreds of tooling supplies for your industrial moulder and knife grinding room. If you're new to the industry, read some of our informational articles they will help you get started with all the basics. One thing we have in common is our passion for excellence and our quest to be paramount craftsman for all our clients.

For knife quoting purposes click to open the calculator below, we have added only the important measurements, enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. Need some assistance with the dimensions? Print a copy of our fraction - decimal - millimeter chart, place it on the molder to help operators save time and increase accuracy during machine setup.

Width = 1.375" / Depth of Cut = .876" (top knives.)

Thickness = 1.062" / Depth of Cut = .250" (left cutters.)