Ogee 3/4" - 34

This attractive baseboard 6-1/4" - 21, measures 6.250" wide by .750" thickness, allowing the detail to be machined out of four-quarter lumber. The lovely profile serves two purposes; a baseboard and a crown backer molding. The profile composes a 2-7/8" flat line segment with an 11/16" rolled inside edge on the top center. Attached to a 23/64" wide fillet and a shallow two tangent radii cyma recta, with a 3/8" wide flat line and a 1/2" congee derived from a 1/4" cove, with a 3/64" eased edge on the right side of the design. Explore our backout category for an appropriate relief cut for the bottom of this detail, we’re confident you will find a suitable design to match your needs.

Utilize any of our enchanting patterns to create a stylish molding catalog for your millwork company, or, simply connect our catalog to your website, offer more eye-catching profiles and give your clients more knowledge about our industry while reducing production cost spent on molding knife design. Let us help you remodel that beautiful house in the transformation into an elegant home.

For knife quoting purposes, click to open the calculator below; we supplied only the important measurements; please enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. If you would like some assistance with the dimensions, print a copy of our fraction - decimal - millimeter chart, place it on the molder, or around the shop to help machine operators save time and increase accuracy during setup procedures.

Width = 6.250" / Depth of Cut = .727" (top knives) & .062" (bottom cutters).