Bullnose 1"

This 1" bullnose measures 1.000" in thickness. The suggested rough wood rip size using five-quarter lumber is 1/4" larger in width than the sought-after milled dimension.This detail is milled on the right spindle so the machine's guide fence after the left spindle will not indent or damage the nosing from the sharp edge of the metal rail. Widths are adjustable to any desired size within the parameters of the machinery used to manufacture the detail.

The profile is comprised of a 1/2" radius half-round circle with a good blend area on each side edge of the pattern. Be aware bullnose profiles are generally milled from vertical spindles, and they are not intended for milling half-round profiles because of the extra blend area incorporated in the knife design. This extra knife extension would strike the bedplates of the machinery. If you're looking to mill a one-inch half-round pattern please search in that category. The same predicament holds for half-round details, they are milled from the top horizontal cutterhead, and the knives will come within .020" of the machine bedplates; they do not have any blend areas built into the cutter design, so if you try to mill a bullnose with these types of blades, you will experience knife-edge indentations in your finished moulding, rendering the product unsellable.

Utilize any of our moulding patterns to create a stylish moulding catalog for your millwork company, offer more eye-catching profiles to your clients while reducing production cost spent on knife design. Please let us help you in the transformation of your client's house being constructed into a home.