Corner 2-5/16"

This semicircular outside corner 2-5/16" measures 2.297" wide by 1.035" thickness, allowing the pattern to be milled from five-quarter lumber. The attractive profile is composed of a 1-5/8" radius arc on top, the sides consist of 13/16" wide forty-five degree beveled edges for the baseboard to butt into during installation, the bottom retains a 13/16" semicircular arc for seating on the rounded edges of the joined walls.

Our purple colored ceramic blend grinding wheel hogging at 2000 rpm with a twenty-five-degree back clearance angle will rough grind a set of high-speed steel cutters in a minimal amount of time. Review our article on the importance of having the profile grinder level this commentary will insure prolonged use of your machinery while maintaining consistent perfection when grinding cutters.

For knife quoting purposes, click to open the calculator below; we have added only the important measurements; enter the appropriate dimension in the boxes provided. A brief detailed explanation of how to use the calculator is located here.

Width = 2.312" / Depth of Cut = .538" (top knives) & .625" (bottom cutters).