Edge Moulding 3/4" - 56

This stepped ovolo edge moulding 3/4" - 56 measures .750" thickness, enabling the detail to be machined from four quarter lumber, the width can be milled to any desired size within the parameters of the molder or shaper used to cut the pattern. The tiered profile is composed of a 1/4" tall vertical line segment on the bottom right hand side of the pattern, connected to a 1/8" wide by 1/8" tall notch that joins to a 1/8" wide horizontal line with a 1/4" quarter round arc and a 1/8" tall vertical line on the upper face side of the design.

Weinig's light blue colored full ceramic grinding wheel hogging at 2000 rpm, with a twenty-five-degree back clearance angle will rough grind a set of high-speed steel cutters in a minimal amount of time. Also review our article on the importance of having the profile grinder level, this commentary will insure prolonged use of your machinery while maintaining consistent perfection when manufacturing cutters.

For knife quoting purposes click to open the calculator below, we have added only the important measurements, just enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. Need some assistance with the dimensions? Print a copy of our fraction - decimal - millimeter chart, place it on the molder to help operators save time and increase accuracy during machine setup.

Thickness = .750" / Depth of Cut = .000" (right blades) & .000" (left cutters.)