Edge Moulding 3/4" - 44

This chamfered edge moulding 3/4" - 44 measures .750" thickness, permitting the detail to be milled out of four quarter lumber, the width can be machined to any desired size within the parameters of the moulder or shaper used to cut the pattern. The profile is composed of a 1/4" tall vertical line segment with a 3/64" eased edge on the bottom right side, attached to a 15/16" wide 14.931 degree angled line in the center, joined to a 3/16" wide 53.167 degree chamfered edge on the top face of the design. We have another similar profile you may want to review and consider, edge moulding .750" - 32.

Mirror Reflections provides the cut steel size on all their molding template designs, this important information allows you to purchase the correct size width of knife steel before you start grinding procedures for production, this is just one more example of us caring about the overall success of your business.

For knife quoting purposes click to open the calculator below, we have added only the important measurements, just enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. Need some assistance with the dimensions? Print a copy of our fraction - decimal - millimeter chart, place it on the molder to help operators save time and increase accuracy during machine setup.

Thickness = .750" / Depth of Cut = 1.125" (right blades) or 1.125" (left cutters.)