Cabinet Door Moulding 2-7/8" - 13

This cabinet door moulding 2-7/8" - 13 measures 2.875" in width by .813" in thickness and requires 3-1/8" wide blanks of four-quarter lumber for machining on an industrial moulder. The modern profile contains a 1-1/16" flat line with a 1/8" rolled inner edge joined to a 1/32" recessed fillet on the top left. The center retains two 5/16" broad half circles divided by a 1-1/32" sunk fillet with a 1/16" eased edge on the right side of the design above the dado for the panel.

Proper tool balance is important to your current molding operation. Read how critical it is to have balanced knives, screws, gibs in the cutter head. The is also information on the problems it can create if you neglect to focus on this simple task. Protect your current woodworking machinery; your clients will appreciate the wood molding quality and your disciplined manufacturing approach.

For knife quoting purposes, click the calculator below; we supplied the important measurements; please insert the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. If you would like some assistance with the dimensions, feel free to print a copy of our fraction - decimal - millimeter chart, place it on the machinery around the shop to help operators save time and increase accuracy during setup procedures.

Width = 2.875" / Depth of Cut = .457" (top knives).