Drawer Front Moulding 1-3/4" - 32

This beautiful drawer front molding 1-3/4" - 32, measures 1.750" width by .812" thickness, permitting the pattern to utilize four quarter lumber for milling on a commercial-grade molder. The lovely beaded detail contains a 31/64" broad semicircle on the top left, connected to a 5/16" full sunk fillet and an additional half-circle in the center. Attached to a 5/32" line segment with a small vertical step merged with a three tangent radius ogee on the right side of the design. We also offer the matching door rail of this pattern for your review and consideration, door rail 3.000"- 10.

Our purple colored ceramic blend grinding wheel hogging at 2000 rpm with a twenty-five-degree back clearance angle will rough grind a set of high-speed steel cutters in a minimal amount of time. Also, review our article on the importance of having the profile grinder level, this commentary will insure prolonged use of your machinery while maintaining consistent perfection when manufacturing cutters.

For molding knife quoting purposes, click to open the calculator below; we supplied only the important measurements, enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. If you would like some assistance with the dimensions, print a copy of our fraction - decimal - millimeter chart, place it on the molder, or around the shop to help machine operators save time and increase accuracy during setup procedures.

Width = 1.750" / Depth of Cut = .466" (top cutters).