Crown Moulding 8" - 9

This majestic crown moulding 8" - 9 measures 7.960" wide by 1.500" thickness. The grandiose profile is comprised of a 1" tall vertical line on top, connected to a 4-1/4" radius cove in the center, joined to a 9/32" wide horizontal line attached to a 1-33/64" radius arc merged with a 1/4" tall vertical line and a 7/8" wide horizontal line at the bottom of the pattern. If you want to enhance this crown design even more, review and consider installing plant on/applied moulding 1.750" - 21 on the bottom.

The spring angles are fixed at thirty-eight and fifty-two degrees, these specific back bevels set the installed height at 6" tall with a projection of 5-1/4" wide. Two high points in the detail were intentionally positioned on the same plane, our disciplined design features will assure excellent hold down conditions while milling, providing the moulder pressure shoe is parallel to the machine bed plates.

For knife quoting purposes use the calculator below, we have added only the important measurements, just determine the cutters you need. A brief detailed explanation on how to use the calculator is located here. Need some assistance with the dimensions? Print a copy of our fraction - decimal - millimeter chart, place it on the moulder to help operators save time and increase accuracy during machine setup.

Width = 8.000" / Depth of Cut = 1.125" (top knives).

Thickness = 1.500" / Depth of Cut = .702" (right blades) & .583" (left cutters).