Crown Moulding 6-1/2" - 14

This cove style crown moulding 6-1/2" - 14 measures 6.500" wide by 1.250" thickness, allowing the detail to be milled from six quarter lumber. The stylish profile is composed of a 3-3/4" radius cove in the middle, attached to a one half inch wide by one half inch tall notch, joined with a 1/2" tall vertical and 1/2" wide horizontal line on the top and bottom of the design. The spring angles are fixed at forty-five degrees, these devoted back bevels set the installed height and projection at an identical dimension of 4-19/32" tall and wide. We offer this profile design with a shallower cove for your review and consideration, crown molding 6.500" - 15, this pattern can be milled from five quarter lumber which will save money in manufacturing cost.

Four high points in the design were intentionally positioned on the same plane, our specialized design features will assure optimal hold down conditions while milling the pattern on an industrial moulder providing the moulder pressure shoe is parallel to the bed plates. From just an idea in one's mind, to reality in their home, our profiles reflect the beauty and style of your imagination, let us help you design a custom pattern today.

For knife quoting purposes click to open the calculator below, we have added only the important measurements, just enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. Need some assistance with the dimensions? Print a copy of our fraction - decimal - millimeter chart, place it on the molder to help operators save time and increase accuracy during machine setup.

Width = 6.500" / Depth of Cut = .696" (top knives).

Thickness = 1.250" / Depth of Cut = .913" (right blades) & .913" (left cutters.)