Crown Mould 6-1/2" -1

This beautiful 6-1/2" - 1 symmetrical terminating crown mould comprises a four-inch radius cavetto in the center. A 5/32" wide sunk fillet flanks it joins to a thumbnail-shaped arc connected to a 9/32" cove boarded by small horizontal and vertical line segments at the top left and bottom right corners of the design. The spring angles are at forty-five degrees; the dedicated back bevels keep the face sides of the pattern parallel to the wall and ceiling. These specific angle positions lock the installed height at 4-19/32" tall with a 4-19/32" projection across the top. The pattern measures 6.500" in width by 1.125" in thickness. The recommended rough wood rip-size milling sprung (laying horizontally flat) using five or six-quarter lumber is 6-3/4" wide.

We offer other sizes of the same lovely design for your review and consideration, crown mould 3.437" - 7, crown mould 3.469", crown mould 4.687" - 5, crown mould 4.750" - 7, and crown mould 5.000" - 11. The present-day combined high-speed steel knives & profile template prices are listed below for quoting purposes. On most of our cove, crown, and bed mould designs, we utilize a full 2.375"/60mm cutter head for the back cut angles to allow for multiple axial adjustments on a wide range of patterns.