Crown 4-11/16" - 5

This fashionable 4-13/16" - 5 terminating symmetrical crown mould comprises a 2-17/64" radius concave semicircular arc in the center. The cove connects to a small sunk fillet merged with an elliptical-shaped convex turn, attached to a 17/64" cove flanked by vertical and horizontal segments on the top left and bottom right corners of the design. The spring angles are at forty-five degrees; the dedicated back bevels keep the face sides of the pattern parallel to the wall and ceiling. These specific angle positions lock the installed height at 3-5/16" tall with a 3-5/16" projection across the top. The pattern measures 4.683" in width by .812" in thickness. The recommended rough wood rip-size milling sprung (laying horizontally flat) using four-quarter lumber is 4-15/16" wide.

We offer other sizes of the same lovely design for your review and consideration, crown 3.437" - 7, crown 3.469", crown 4.750" - 7, crown 5.000" - 11 and crown 6.500" - 1 The present-day combined high-speed steel knives & profile template prices are listed below for quoting purposes. On most of our cove, crown, and bed mould designs, we utilize a full 2.375"/60mm cutter head for the back cut angles to allow for multiple axial adjustments on a wide range of patterns.