Crown 5-7/8" - 13

The enthralling 5-7/8" - 13 crown mould measures 5.868" width by .813" thickness, allowing the use of four quarter lumber for milling on a commercial molder. The asymmetrical supporting profile contains a 7/16" quarter round convex arc joined to a 3/16" tall vertical line segment on the top left. This area merges with a 7-1/2" concave semicircular arch that connects to a 1/4" radius half-circle and a 3/16" high by 1/2" broad perpendicular lines at the bottom of the design. The set spring angles are at thirty-five and fifty-five degrees; these dedicated back bevels keep the face side of the profile parallel to the wall and ceiling when installed; they also lock in the positioned height at 4-5/8" tall with a projection of 3-5/8" across the top. We offer a few profiles with similar design characteristics retaining different height & projection dimensions for your review and consideration, crown 3.625" - 22 and crown 5.812" - 4.

The present-day combined high-speed steel knives & profile template prices are listed below for quoting purposes. In most of our crown, cove, and bed mould designs, we utilize a full 2.375"/60mm cutter head for the back bevel angles to allow for multiple axial adjustments on a wide range of patterns.