Crown 4-3/4" - 26

This gorgeous 4-3/4" - 26 crown mould measures 4.776" wide by 1.000" thickness, permitting the use of five-quarter lumber to be machined sprung (laying horizontally flat) on an industrial moulder. The pulchritudinous supporting profile is comprised of a 15/64" tall by 3/32" perpendicular lines on the top left, joined to a 3/16" radius ovolo with a 7/64" vertical drop in elevation that merges with a three-inch radius cove in the center, joined to a 7/64" broad segment and an 11/64" quarter round bead, connected to a small two tangent radius cyma reversa and a 7/16" wide flat line on the bottom right side of the design. The spring angles are fixed at thirty and sixty degrees, these precise back bevels keep the inner sections of the profile parallel to the wall and ceiling as well as set the installed height at 4" tall with a projection of 2-5/8" across the top.