Crown 2-9/16" - 3

This decorative 2-9/16" - 3 crown mould measures 2.562" wide by .750" thickness. The profile is comprised of a two tangent radius cyma recta in the center, attached to a 17/64" tall vertical line on top and a 1/4" tall by 21/64" broad horizontal line at the bottom of the pattern. The spring angles are fixed at thirty-eight and fifty-two degrees, these specific back bevels set the installed height at 1-15/16" tall with a projection of 1-11/16" wide.

Read our commentary about axial constant positioning for crown bevels, the article will help you dial this profile in axially on the first try when milling this detail provided the machine is axially calibrated. We have a couple of other similar profiles in the same width but different heights and projections for your review and consideration, crown 2.562" - 2 and crown 2.562" - 4.