Cove Moulding 1-3/4" - 4

This small lovely cove moulding 1-3/4" - 4 measures 1.750" wide by .625" thickness, permitting the detail to be milled sprung (laying horizontally flat) out of four quarter lumber. The symmetrical profile is comprised of a 13/16" radius cove in the center, flanked by a 15/32" tall vertical line segment on top and a 15/32" wide horizontal line at the bottom of the design. The spring angles are fixed at forty-five degrees, these explicit back bevels keep the inner profile parallel to the wall and ceiling as well as set the installed height at 1-1/4" tall with a projection of 1-1/4" wide.

Weinig's light blue colored ceramic grinding wheel hogging at 2000 rpm, with a twenty-five-degree back clearance angle will rough grind a set of high-speed steel cutters in a minimal amount of time. Also review our article on the importance of having the profile grinder level, this commentary will insure prolonged use of your machinery while maintaining consistent perfection when manufacturing cutters.

For knife quoting purposes click to open the calculator below, we have added only the important measurements, just enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. Need some assistance with the dimensions? Print a copy of our fraction - decimal - millimeter chart, place it on the molder to help operators save time and increase accuracy during machine setup.

Width = 1.750" / Depth of Cut = .398" (top knives.)

Thickness = .625" / Depth of Cut = .320" (right blades) & .320" (left cutters.)