Door/Window Casing 2-13/16" - 2

This gorgeous 2-13/16" - 2 door/window casing measures 2.812" wide by .781" thickness, permitting the use of four-quarter lumber for milling on an industrial-grade molder. The beautiful profile contains a 41/64" broad flat line with a 1/16" rolled outer edge on the top left. This section joins to a 1-3/8" wide by 11/64" deep congee derived from a 3/16" radius cove in the center. It's attached to a 9/64" drop-in elevation that merges with a two-tangent convex semicircular arc and a 13/64" full-line segment with a 3/64" eased edge, leaving a 7/32" thickness dimension on the right side of the design.

Our purple-colored ceramic blend grinding wheel hogging at 2000 rpm with a twenty-five-degree back clearance angle will rough grind a set of high-speed steel cutters in a minimal amount of time. Review our article on the importance of having the profile grinder level. This commentary will ensure prolonged use of your machinery while maintaining consistent perfection when manufacturing the cutters.

The present-day combined high-speed steel knives & template prices are listed below for quoting purposes.