Floor/Shoe Rail Moulding 2-3/8" - 1

This floor/shoe rail moulding 2-3/8" - 1 measures 2.375" wide by .750" thickness. The symmetrical design is comprised of a 1-1/4" wide by 9/32" deep dado for balusters, attached to a 11/32" wide by 11/64" deep step, with a 1/4" radius half round circle and a 1/16" tall vertical line at the bottom on both sides. Browse our handrail category to find a lovely pattern to complement this detail. This professionally drafted cad dxf file contains two high precision template designs to create cutters for this decorative profile enabling width changes to a desired size.

Our purple colored ceramic blend grinding wheel hogging at 2000 rpm, with a twenty-five-degree back clearance angle will rough grind a set of high-speed steel cutters in a minimal amount of time. Review our article on the importance of having the profile grinder level, this commentary will insure prolonged use of your machinery while maintaining consistent perfection when grinding cutters.

For knife quoting purposes use the calculator below, we have added only the important dimensions, just determine the cutters you need. A brief detailed explanation on how to use the calculator is located here.

Width = 2.375" / Depth of Cut = .281" (top knives).

Thickness = .750" / Depth of Cut = .216" (right blades) & .216" (left knives), only one template is required for the side blades.