43 Degree Back Bevel Cutter

This 43-degree back bevel cutter is designed to mill a chamfer on the backside of a piece of bed, crown or cove moulding. This bevel design the maximum depth of cut can only be .808" with the maximum height of cut being set at .867". All sprung moulding designs have height numbers near the edge of the degree on the paperwork we provide, that number must be smaller than the height number in the image above, in this case .867" for this knife to be able to cut the entire thickness of the back cut.

Read our commentary about axial constant positioning for crown bevels, the article will help you dial this profile in axially on the first try when milling this detail provided the machine is axially calibrated.

For knife quoting purposes use the calculator below, we have added only the important dimensions. A brief detailed explanation on how to use the calculator is located here.

Thickness = 1.625" / Depth of Cut = .808" (right or left knives).