26 Degree Back Bevel Cutter

This 26 degree back bevel moulding knife is designed to mill a chamfer on the right side of the back of a piece of crown, bed or cove moulding. These knives will create only half of the determining factor of the final height and projection when the crown moulding is installed. This knife has a maximum depth of cut of .531" with the maximum height of cut being set at 1.089".

Every crown moulding we design has height numbers near the edge of every bevel, that number must be smaller than the height number (in this case 1.089") for this knife to be able to cut properly while milling, if not, please select a different sized bevel.

Please read our commentary about Axial Constant Position for Crown Moulding Bevels, this article will help you dial this profile in axially on the first try when milling this detail on an industrial moulder, provided the moulder is axially calibrated.