Bed Mould 3-3/16"

This beautiful 3-3/16" supporting bed mould measures 3.187" wide by .813" thick. The stylish profile comprises a 1-7/64" radius arc in the upper portion, connected to a 1/4" tall fillet in the center, attached to a 1-1/64" radius cavetto with a 1/4" wide horizontal fillet at the bottom of the pattern. The spring angles are at forty-five degrees; the dedicated back bevels keep the face sides of the pattern parallel to the wall and ceiling. These specific back angle positions lock the installed height at 2-17-32" tall with a 2" projection across the top. The pattern measures 3.188" in width by .812" in thickness. The recommended rough wood rip-size milling sprung (laying horizontally flat) using four-quarter lumber is 3-7/16" wide.

The present-day combined high-speed steel knives & profile template prices are listed below for quoting purposes. On most of our cove, crown, and bed mould designs, we utilize a full 2.375"/60mm cutter head for the back cut angles to allow for multiple axial adjustments on a wide range of patterns.

Please read our commentary about axial constant position for crown mould bevels, the article will help you dial this profile in axially on the first try when milling this detail provided the machinery is axially calibrated.