Backout/Relief Cut 5" - 11

This double backout 5" - 11 measures 5.000" in width. The symmetrical profile contains a 1/2" wide flat section in the center. The short line is flanked by two 1-3/4" wide by 5/64" deep plows with 1/16" concave edges, leaving a 1/2" horizontal fillet on both the right and left edges of the pattern. The maximum width the knives can cut is 5.750" wide with the axial position at zero on the machinery.

Our purple-colored ceramic blend grinding wheel hogging at 2000 rpm with a twenty-five-degree back clearance angle will rough grind a set of high-speed steel cutters in a minimal amount of time. Review our article on the importance of having the profile grinder level. This commentary will ensure prolonged use of your machinery while maintaining consistent perfection when manufacturing the cutters.

The present-day combined high-speed steel knives & template prices are listed below for quoting purposes.