Backband 1-1/4" - 11

This ogee backband 1-1/4" - 11 measures 1.250" wide by 1.250" tall. The attractive profile is comprised of a 1/2" wide by 1/8" tall raised fillet with a 1/16" eased outside edge and a 3/64" inside edge, connected to a two tangent radius ogee with a 3/64" rounded edge, leaving a 1/8" thickness dimension above the rabbet which measures 1/4" wide by 3/4" tall. The bottom has a 3/16" wide line segment attached to a five-degree chamfer. This cut will aid while scribing the pattern to the wall when installed and provide an area for the left guide fence on the molder to rest against while milling the profile.

Do you realize how important proper tool balance is to your current molding operation? Find out more on how critical it is to have perfectly balanced knives, screws, gibs in the cutter head, and the problems they create if you neglect to focus on these simple task. Protect your current investment in woodworking machinery; your clients will appreciate your disciplined approach to manufacturing.

For knife quoting purposes, click to open the calculator below; we have added only the important measurements; enter the appropriate dimension in the boxes provided. A brief detailed explanation of how to use the calculator is located here.

Width = 1.500" / Depth of Cut = .250" (top knives.)

Thickness = 1.250" / Depth of Cut = .572" (right blades) & .095" (left cutters.)