5/16" Radius Edge Moulding - 4

This double radius edge moulding 5/16" - 4 measures 1.000" thickness, allowing the pattern to be machined out of four quarter lumber, the width can be milled to any desired size within the parameters of the moulder or shaper used to cut the pattern. The profile knife design is capable of cutting two 5/16" round-overs on a single edge of a piece of lumber measuring 3/4" thickness. The acrylic template can be flipped over and referenced to either side of the profile grinder to manufacture a set of right or left knives for both vertical cutter heads on a moulder, this will enable all four sides of the lumber to be milled simultaneously.

Be sure to check out a few other profile designs for different rooms in your beautifully stylish home, with over 15,000 patterns in our search by size moulding catalog there is something for everyone’s creative architectural style. Utilize our manufacturers map listed by states to help you locate a mill in your area to produce any of our attractive profiles.

For moulding knife quoting purposes click to open the calculator below, we supplied only the important measurements, just enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. If you would like some assistance with the dimensions feel free to print a copy of our fraction - decimal - millimeter chart, place it on the molder, or around the shop to help machine operators save time and increase accuracy during setup procedures.

Thickness = .750" / Depth of Cut = .469" (right blades) &, or .469" (left cutters).