1/4" Radius Edge Moulding - 6

This double radius edge molding 1/4" - 6 measures 1.625" thickness, necessitating the use of eight quarter lumber for milling, the width can be machined to any desired size within the parameters of the molder or shaper used to cut the pattern. The profile knife design can cut two 1/4" round-overs on a single edge of a piece of lumber measuring 1-5/8" thickness. The acrylic template can be flipped over and referenced to either side of the profile grinder to manufacture a set of right or left knives for both vertical cutter heads; this will enable all four sides of the lumber to be milled the same time.

Need this profile template and a set of molding knives quickly? We generally can have these cutters ground with any one of our premium quality high-speed steels or carbide and shipped within twenty-four hours. We have artistic profiles from several different architectural eras; there are literally thousands of compelling designs to help match your creative style.

For knife quoting purposes, click to open the calculator below; we supplied only the important measurements; enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. If you would like some assistance with the dimensions, feel free to print a copy of our fraction - decimal - millimeter chart, place it on the molder, or around the shop to help machine operators save time and increase accuracy during setup procedures.

Thickness = 1.625" / Depth of Cut = .406" (right blades) & .406" (left cutters).