1/4" Radius Edge Moulding - 22

This double 1/4" radius edge molding - 22 measures three-inch thickness; the width can be machined to any desired size within the parameters of the molder or shaper used to mill the pattern. The knives can mill two 1/4" radiuses on one edge of a piece of lumber measuring 3" width or thickness. The acrylic template can be flipped over and referenced to either side of the profile grinder to manufacture a set of right or left knives for both vertical side cutter heads; this will enable all four sides of the lumber to be milled simultaneously.

Thinking about building an enclosed tool room for the profile knife grinder, template making machine and a place to store all your molding templates and knives? Please read our helpful commentary on securing the knife grinder's linear bearings, this small, simple task can save you thousands of dollars in repair cost from not securing the table bearings before moving.

For knife quoting purposes, click to open the calculator below; we have added only the important measurements; enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. Need some assistance with the dimensions? Print a copy of our fraction - decimal - millimeter chart, place it on the molder to help operators save time and increase accuracy during machine setup.

Thickness = 3.000" / Depth of Cut = .500" (right blades) & .500" (left cutters).