3/16" Radius Edge Moulding - 3

This double radius edge moulding 3/16" - 3 measures .687" thickness, enabling the detail to be machined out of four quarter lumber, the width can be milled to any desired size within the parameters of the shaper or molder use to cut the pattern. The blades are capable of milling two 3/16" round-overs on a single edge of a piece of lumber measuring 11/16" thickness dimension. The acrylic template can be flipped over and referenced to either side of the knife grinder to manufacture a set of right or left knives for both vertical cutter heads on the machinery, this will enable all four sides of the lumber to be milled simultaneously.

Our precise cad drawings contain plenty of important information that will assist you during setup and milling of this detail. Our acrylic templates provide sufficient blend areas on the knives so you will never realize where one cutter begins or ends, these specific design features will substantially increase yield during the milling process.

For knife quoting purposes click to open the calculator below, we have added only the important measurements, just enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. Need some assistance with the dimensions? Print a copy of our fraction - decimal - millimeter chart, place it on the molder to help operators save time and increase accuracy during machine setup.

Thickness = .687" / Depth of Cut = .343" (right blades) & .343" (left cutters.)