1/8" Radius Edge - 27

This double 1/8" radius edge - 27 measures 1.625" thickness; the width is milled to any desired size within the parameters of the machinery used to mill the pattern. The profile can mill two 1/8" radiuses on the edges of lumber measuring 1-5/8" thickness. The acrylic template can be flipped over and referenced to either side of the profile grinder to manufacture a set of right or left knives for both vertical cutter heads; this will enable all four sides of the lumber to be milled simultaneously.

Review some of our helpful moulder and knife grinding articles, they will assist you in many aspects of machine set up and knife grinding procedures. These commentaries were written to help you be more familiar with the machinery while making your job a little easier in the process.

For knife quoting purposes, use the calculator below; we have added only the important measurements to determine the cutters you need. A brief detailed explanation on how to use the calculator is located here. Need some assistance with the dimensions? Print a copy of our fraction - decimal - millimeter chart, place it on the moulder to help operators save time and increase accuracy during machine setup.

Thickness = 1.875" / Depth of Cut = .312" (right blades) & .312" (left cutters).