Picture Frame 4-3/8" - 1

This elaborate picture frame 4-3/8" - 1 measure 4.375" wide by 2.031 thickness, requiring the use of ten-quarter lumber for milling. The beautifully ornate profile is composed of a steep down-sloping cyma reversa on the top left, connected to a 3/8" cove flanked by two obtuse angled lines on each side and a small line segment with a 1/4" rounded edge in the center, merged with a 3/4" wide sunk fillet that transitions into a series of tiny v-shaped notches with a 9/64" rounded edge on the right side. The rabbet dimension for the artwork is 1/2" wide by 13/16" tall; this area can be adjusted in height to any specific requirements with an easy axial adjustment of the left vertical cutter head on the machinery used to mill the design.

Be sure to check out a few other profile designs for different rooms in your beautifully stylish home, with over 15,000 patterns in our search by size moulding catalog there is something for everyone’s creative architectural style. Utilize our manufacturers map listed by states to help you locate a mill in your area to produce this creative pattern.

For knife quoting purposes click to open the calculator below, we have added only the important measurements, just enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. Need some assistance with the dimensions? Print a copy of our fraction - decimal - millimeter chart, place it on the molder to help operators save time and increase accuracy during machine setup.

Width = 4.375" / Depth of Cut = 1.125" (top knives.)

Thickness = 2.031" / Depth of Cut = .500" (left cutters.)