Panel Moulding 2-9/16" - 5

This distinctive panel moulding 2-9/16" measures 1.562" wide by 1.312" thickness, necessitating the use of six quarter lumber for milling on an industrial moulder. The classy profile is composed of a 5/16" cove joined to a 1/8" wide horizontal line segment on the top left, merged with a free-flowing two tangent radius cyma reversa with a 1/8" vertical step in the center, attached to a beautiful two tangent radius ogee leaving a 3/16" thickness dimension on the right side of the design. The back left side rabbet measures 1/4" wide by 3/4" tall, the height of the rabbet can be adjusted to any specific size.

Review our commentary on custom made pressure shoes, this helpful step by step article will help you mill this profile to perfection. Did you know we design and grind moulder knives for all the major brand names of machinery including Weinig, Leadermac, Homag, Scmi, Diehl, Wadkin, Williams & Hussey and more. Try our exceptional services, you'll be delighted with the results, all the beautiful mouldings you manufacture will surely be a cut above the rest.

For moulding knife quoting purposes click to open the calculator below, we supplied only the important measurements, just enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. If you would like some assistance with the dimensions feel free to print a copy of our fraction - decimal - millimeter chart, place it on the molder, or around the shop to help machine operators save time and increase accuracy during setup procedures.

Width = 2.562" / Depth of Cut = 1.125" (top knives.)

Thickness = 1.312" / Depth of Cut = .250" (left cutters.)