Panel Moulding 2-3/8" - 1

This beautiful panel moulding 2-3/8" - 1 measures 2.375" wide by .875" thickness, the pattern can be milled from four quarter lumber if the molder's metal feed rollers are kept in the profile area. The detail is comprised of a 19/32" wide flat line with a 11/64" vertical step on top, joined to a 3/64" wide sunk fillet that transitions into a three tangent radius cyma reversa, attached to a thumbnail shaped half round circle and a 5/32" wide flat line with a small cyma recta on the thin side of the design. The backside rabbet measures 3/16" wide by 9/16" tall but can be adjusted axially to any specific needs.

Review our commentary on custom made pressure shoes, this helpful step by step article will help you mill this profile to perfection. Did you know we design and grind moulder knives for all the major brand names of machinery including Weinig, Leadermac, Diehl, Kentwood, Wadkin, Scmi, Shop Fox, Williams & Hussey and more. Try our exceptional services, you'll be delighted with the results, all the beautiful mouldings you manufacture will surely be a cut above the rest.

Caution; the cutters will come within .020" of the moulder bed plates when milling this detail. We recommend a wooden, phenolic or plastic sacrificial bed plate be used for these types of milling operations. For knife quoting purposes click to open the calculator below, we have added only the important measurements, just enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. Need some assistance with the dimensions? Print a copy of our fraction - decimal - millimeter chart, place it on the molder to help operators save time and increase accuracy during machine setup.

Width = 2.375" / Depth of Cut = .875" (top knives.)

Thickness = .875" / Depth of Cut = .187" (left cutters.)