Panel Moulding 2-1/16" - 3

This embellishing panel molding 2-1/16" - 3, measures 2.062" wide by .750" thickness, enabling the use of four quarter lumber for milling. The decorative profile consists of a 3/16" wide flat line with a 3/64" rolled edge on the top left. This section joins to a 49/64" wide half-circle and a 1/8" wide slightly tapered fillet in the center. Joined to an angled congee derived from a 1/16" cove wit ha 5/32" angled line segment, leaving a 1/18" thickness dimension on the right side of the design. The backside rabbet measures 1/4" wide by 1/2" tall; this area is adjustable to any specific needs.

Do you ever wonder why certain species of wood have tear-out problems during the milling process? Find out more on how to reduce and eliminate tear issues by changing the cutter head hook angle on the knives. Purchasing 12/20 duel angle cutter heads will save a substantial amount of money when investing in this style of molder tooling.

For molding knife quoting purposes click to open the calculator below, we supplied only the important measurements, enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. If you would like some assistance with the dimensions print a copy of our fraction - decimal - millimeter chart, place it on the molder, or around the shop to help machine operators save time and increase accuracy during setup procedures.

Width = 2.062" / Depth of Cut = .875" (top knives).

Thickness = .750" / Depth of Cut = .250" (left cutters).