Panel Moulding 2" - 20

This distinguished panel molding 2" - 20 measures 2.000" width by 1.062" thickness when installed. The pattern is machined sprung (laying horizontally flat) utilizing four quarter lumber, the milling dimensions are 2-3/32" wide by 49/64" thickness. The stylish pattern contains a 1/4" cove joined to a 3/32" broad line segment with a 49/64" half circle and an additional 3/32" fillet on the top center. The horizontal line merges with a 17/32" concave semicircle and a 1/4" radius convex arc on the right side of the pattern. The backside rabbet dimensions are 1/2" wide by 1/2" tall.

Look for a few other profile designs for different rooms in your beautiful, stylish home, with over 15,000 patterns in our search by size molding catalog there is something for everyone's creative architectural style. Utilize our manufacturers map listed by states to help you locate a mill in your area to produce any of our attractive profiles.

For molding knife quoting purposes, click to open the calculator below; we supplied only the important measurements, enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. If you would like some assistance with the dimensions, print a copy of our fraction - decimal - millimeter chart, place it on the molder or around the shop to help machine operators save time and increase accuracy during setup procedures.

Width = 2.125" / Depth of Cut = .676" (top knives) & .265" (bottom cutters).