Panel Moulding 1-7/8" - 7

This decorative panel moulding 1-7/8" - 7 measures 1.875" wide by .937" thickness, necessitating the use of five quarter lumber for milling on an industrial moulder. The strikingly beautiful profile is comprised of a 41/64" wide thumbnail shaped bead above the 5/8" tall by 3/8" wide rabbet on the top left, connected to a 7/64" wide horizontal line merged with a 9/64" cove and a 13/64" deep vertical step in the center, joined to a 1-55/64" up-sloping cove and a 1/8" wide flat line segment on the top right. The right side edge retains a 5/16" tall vertical line with a beveled edge to assure a perfect fit when installed.

Custom-made elegance is a phrase used to define the beauty, style and artisanship of thousands of our moulding designs. Whether you own a recently built house or older style residence, we have the ability knowledge and experience to create profiles that will complement the architectural decor of your elegant home or office.

For knife quoting purposes click to open the calculator below, we have added only the important measurements, just enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. Need some assistance with the dimensions? Print a copy of our fraction - decimal - millimeter chart, place it on the molder to help operators save time and increase accuracy during machine setup.

Width = 1.875" / Depth of Cut = .779" (top knives) & .625" (bottom cutters.)